switched-mode power supply WIPOS PB1 5-1.5

DISCONTINUATION - LAST ORDER

Article number 81.000.6321.0

wipos switched-mode power supply, nominal voltage: 5 V DC / 1,5A, sustained short-circuit protection, input voltage range: 90-264 V AC / 120-375V DC, single phase, DIN rail mounted device 1 mod.

Overview

Technical Data

Downloads

commercial data

article number	81.000.6321.0
article description
EAN	4049088106132
Minimum order quantitiy	1
country of origin	TW
customs tariff number	85044083

packaging dimensions

length packed	130 mm
width packed	95 mm
height packed	40 mm
gross weight packed	113.18 g
volume packed	494 ccm
net weight single part	62.46 g
volume single part	494 ccm
packaging	cardboard
packaging quantity	1 piece(s)

certificates / approvals

general

connection type	screw connection
suitable for modular version	yes
mounting type, other	no
mounting type, wall mounting	no
rail mounting possible	yes
housing material	plastic
operating temperature min.	-40 °C
operating temperature max.	71 °C
storage temperature / transport min.	85 °C
storage temperature / transport max.	-40 °C
degree of protection (IP)	IP20
pollution degree	2
parallel-service possible	no
relative humidity min.	20 %
relative humidity max.	95 %
number of phases	single phase power supply

technical data

type of voltage (input voltage)	AC/DC
power output	7.5 W
type of output voltage	DC
output voltage stabilized	yes
primary voltage range	90 V
min. input voltage	90 V
output voltage	5 V
output current	1.5 A
max. input voltage	264 V
connector cross section (input	min. 0.2mm² (AWG24)max.2.5mm² (AWG12)
connector cross section (output)	min. 0.2mm² (AWG24)max.2.5mm² (AWG12)
rated frequency min.	47 Hz
rated frequency max.	63 Hz
input current 230 V AC typ.	0.2 A
input current 115 V AC max.	0.3 A
power-factor correction (PFC)	nein
function display	DC OK LED grün (U(o) 3.5...4.5V)
overload protection min.	110 %
overload protection max.	165 %
efficiency	74 %
grid control	1 %
load fluctuation	1 %
temperature coefficient	±0,03%/K
ripple and noise	0.05 V
hold time 115V AC	20 ms
hold time 230V AC	100 ms
isolating voltage Input AC	3000 V
isolating voltage Output DC	4242 V
cohesive resistance (In-/Output)	100 MOhm
relative humidity min.	20 %
cooling	free convection
MTBF	970,000h
wire strip length	5 mm
permissible torque max.	0.56 Nm
number of +	1
number of -	1
further terminals	L, N
relative humidity max.	95 %
output voltage accuracy	1 %
function display "DC Low"	DC LOW LED rot (U(o) ﹤ 3.5...4.5V)
input fuse	T1A / 250 V AC (internal)
approval UL	UL 508 Listed, UL60950-1 Recognized
short-circuit protective device	current limitation (fold forward)
max. starting current	30 A
input protection	varistor (voltage-sensitive resistor)

output

type of output voltage	DC
power output	7.5 W
output voltage stabilized	yes
output voltage	5 V
output current	1.5 A

input

type of voltage (input voltage)	AC/DC
min. input voltage	90 V
max. input voltage	264 V
rated frequency min.	47 Hz
rated frequency max.	63 Hz
input current 115 V AC typ.	0.2 A
input current 115 V AC max.	0.3 A
max. starting current	30 A
input fuse	T1A / 250 V AC (internal)
primary voltage range	90 V
input protection	varistor (voltage-sensitive resistor)

dimensions

depth	56.5 mm
width	18 mm
height	91 mm
mounting distance horizontal	25 mm
mounting distance vertical	25 mm
weight	65 g

classification

ETIM 5.0	DC-power supply
ECLASS 8.1	DC-power supply
ETIM 6.0	EC002540
ETIM 7.0	EC002540
ECLASS 11	27040701
ETIM 8.0	EC002540
ETIM 9.0	EC002540

product compliance

ROHS conformity status	compliant
REACH-SVHC conformity status	compliant

Documentation

Filename	Description	Filesize	File type
Mounting instructions	-	295.77kB	PDF
Technical data sheet - catalogue excerpts	-	205.14kB	PDF

Approbation

Filename	Description	Filesize	File type
EC declaration of conformity	-	275.91kB	PDF
UKCA declaration of conformity	-	57.06kB	PDF
Approval cULus	-	214.09kB	PDF
Approval cURus	-	108.91kB	PDF

Product compliance

Filename	Description	Filesize	File type
REACH-SVHC certificate	-	196.96kB	PDF
RoHS certificate	-	197.18kB	PDF

Drawings

Filename	Description	Filesize	File type
Customer drawings	-	47.55kB	PDF
Customer drawings (TIFF)	-	45.17kB	TIF
Customer drawings (DXF)	-	709.93kB	DXF

CAD model

Filename	Description	Filesize	File type
3D product images	-	258.53kB	PDF
CAD STEP data	-	1.21MB	STP
CAD IGES data	-	2.81MB	IGS
CAD JT data	-	108.11kB	JT

Best Choice

All Industries

Building Technology

Lighting Technology

Machine Building

Wind Power

Horticulture

EV Charging

PREFAB

Service

Infoportal

Product Security (PSIRT)

Downloads

Whitepaper

Inhouse Trainings

Credentials

Wieland as an Employer

Pupils

Students

Graduates

Experienced Professionals